Epoxy Primer (4:1)
A two-pack epoxy primer for metal surfaces, mixed 4:1 base to hardener.
A waterborne, single-component, corrosion-inhibitive shop primer for steel, galvanized steel and aluminium.

In plain words: A water-based, single-can first coat for steel, galvanized steel and aluminium parts, usually applied in a workshop. You can paint over it after 3 hours.
A water-based, single-can first coat that is applied in the workshop to steel, galvanized steel and aluminium parts. It protects against the weather and resists knocks and scratches. Many solvent-based paints can be applied over it.
| Product type | Waterborne, single-component primer |
|---|---|
| Suitable substrate | Steel, galvanized steel, aluminium |
| Recoat | Next coat after 3 hours |
Surface preparation: Remove dirt, oils and salts. On steel, remove loose rust and mill scale (use abrasive blasting if conditions are severe). On galvanized steel and aluminium, wipe the bare metal clean with thinner.
Application method and conditions follow the approved technical data sheet.
Coverage, drying time, DFT, pack sizes and finish are provided in the approved TDS / SDS, with revision date.
Remove dirt, oils and salts. On steel, remove loose rust and mill scale (use abrasive blasting if conditions are severe). On galvanized steel and aluminium, wipe the bare metal clean with thinner.
Yes. Request the technical data sheet and safety data sheet and our team will share the current revision.
Suitability depends on the substrate, surface condition and operating environment. Share these details with our team and we will advise.
A two-pack epoxy primer for metal surfaces, mixed 4:1 base to hardener.
A red oxide primer for metal surfaces in the IMPREUS primer range.
A high-build, single-pack anti-corrosive primer for structural steel.
Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.