600 Degree Heat Resistance Coating
A silicone resin coating for equipment exposed to temperatures up to 600 °C.
A considered range of industrial paints and specialty coatings, with primers and rust-treatment chemicals, for different surfaces, assets and operating environments.
A silicone resin coating for equipment exposed to temperatures up to 600 °C.
A two-pack epoxy paint for hot oil and hot water exposure.
A low-VOC, high-solids, glass-flake-reinforced epoxy for severe atmospheric or mechanical exposure.
A self-priming, aluminium-pigmented epoxy mastic for barrier protection over minimal surface preparation.
A solvent-free epoxy lining for storage tanks and equipment, applied directly to prepared steel.
A two-pack epoxy coating for reinforcement steel (rebar).
A polyurethane thinner for thinning PU systems as directed by the technical data sheet.
A self-priming direct-to-metal finish coat with corrosion and chemical resistance.
A two-pack, high-gloss polyurethane topcoat with high chemical resistance.
A quick-drying, solvent-based, single-pack enamel paint.
A quick-drying, single-pack acrylic paint.
A two-pack epoxy primer for metal surfaces, mixed 4:1 base to hardener.
A red oxide primer for metal surfaces in the IMPREUS primer range.
A waterborne, single-component, corrosion-inhibitive shop primer for steel, galvanized steel and aluminium.
A high-build, single-pack anti-corrosive primer for structural steel.
A zinc-loaded, high-build primer for raw steel that does not affect welding or burning.
A high-build iron oxide and titanium dioxide intermediate coat for ferrous metals.
A water-based nanotechnology chemical that stops rust formation on mild steel.
A 100% organic cleaning liquid for non-ferrous metals: scale removal, sanitising and water marks removal.
Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.