Knowledge Centre
Practical answers to surface protection and coating selection questions, in plain language.
Why Does Steel Corrode?
Rust needs three things: steel, water and oxygen. Take away any one and it cannot form.
Read article · 2 minCorrosion basicsCommon Types of Industrial Corrosion
Rust does not always look like an even orange layer. Knowing which type you have helps you check and protect the asset properly.
Read article · 2 minWhy Surface Preparation Matters Before Painting
Most paint failures start at the surface, not in the can. Good paint on a dirty surface will not last.
Read article · 2 minSurface preparationRust Removal: What to Check
Before you remove rust, look at what kind it is, how deep it goes and what else is on the surface. A short check saves a lot of rework.
Read article · 2 minHow to Choose an Anti-Rust Primer
There is no single best primer. The right one depends on the metal, how well you can prepare it, where it is used and what goes on top.
Read article · 2 minCoating selectionPrimer vs Topcoat: What Is the Difference?
The primer, the middle coat and the topcoat each do a different job. Together they form a coating system.
Read article · 2 minUnderstanding Dry Film Thickness
Dry film thickness (DFT) is how thick the coating is after it has dried. It is one of the most important numbers on a data sheet.
Read article · 2 minApplicationCommon Mistakes During Industrial Painting
Most paint problems come from a few mistakes that are easy to avoid: poor preparation, wrong mixing and wrong conditions.
Read article · 2 minCorrosion Challenges in Coastal Environments
Salt, damp air and constant wetting make the coast one of the hardest places for steel.
Read article · 2 minIndustry knowledgeCorrosion Considerations in Salt and Sugar Plants
Damp air, process residues and plant conditions can all cause corrosion in salt and sugar plants. Start by understanding the assets and the conditions.
Read article · 2 minHave a coating question?
Ask our technical team. Your question may become our next guide.