Industrial Paints, Specialty Coatings & Anti-Rust Solutions
Home/Products/Anti-Rust Paints/Grafted Co-Polymer PU Finish Paint

Grafted Co-Polymer PU Finish Paint

A two-pack, high-gloss polyurethane topcoat with high chemical resistance.

Grafted Co-Polymer PU Finish Paint
Anti-Rust Paints
Two-pack polyurethane finish

In plain words: A tough, glossy final coat for steel that stands up to chemicals. It comes in many colours and is mixed from two parts.

A two-part polyurethane paint that is tough, lasts well and can be recoated later. It gives a hard-wearing glossy finish for outdoor or indoor use and resists chemicals strongly. Its pigments are lead-free (depending on colour). It comes in many RAL and IS colours, in gloss, semi-gloss or matt.

At a glance
Product typeTwo-pack polyurethane finish
Mix ratio4:1 (base : hardener)
FinishGlossy, semi-glossy or matt
ColoursWide RAL and IS range

Key features

  • Durable, glossy finish for outside or inside
  • Highly chemical resistant
  • Lead-free pigments (depending on colour)

Where it is used

  • Final coat on structural work
  • Refineries, petrochemical, chemical and fertilizer plants

See how Grafted Co-Polymer PU Finish Paint works

BASEHARDENER4 : 1GLOSSYSEMI-GLOSSYMATTTWO PARTS: BASE AND HARDENER, 4 TO 1A WIDE RAL AND IS COLOUR RANGEGLOSSY, SEMI-GLOSSY OR MATTHIGHLY CHEMICAL RESISTANT

How to apply

Surface preparation: Clean the surface following normal industrial cleaning practice. Order of work: prepare the surface, apply a suitable first coat, then apply this final coat.

Application method and conditions follow the approved technical data sheet.

Technical data & downloads

Coverage, drying time, DFT, pack sizes and finish are provided in the approved TDS / SDS, with revision date.

Request TDS / SDS

FAQs

What surface preparation is required?

Clean the surface following normal industrial cleaning practice. Order of work: prepare the surface, apply a suitable first coat, then apply this final coat.

What is the mixing ratio?

Grafted Co-Polymer PU Finish Paint is a multi-component system. 4:1 (base : hardener). Always follow the approved technical data sheet.

Can I get the TDS and SDS?

Yes. Request the technical data sheet and safety data sheet and our team will share the current revision.

How do I know if this suits my asset?

Suitability depends on the substrate, surface condition and operating environment. Share these details with our team and we will advise.

More in Anti-Rust Paints

Related products

Technical consultation

Not sure which coating is right?

Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.

Chat on WhatsApp