Grafted Co-Polymer PU Finish Paint
A two-pack, high-gloss polyurethane topcoat with high chemical resistance.
A self-priming direct-to-metal finish coat with corrosion and chemical resistance.

In plain words: A paint that goes straight onto prepared metal, so you do not need a separate first coat.
A high-performance finish coat that goes straight onto metal, so no separate first coat is needed. It looks good and resists corrosion and chemicals.
| Product type | Self-priming finish coat (DTM) |
|---|---|
| Mix ratio | 4:1 (base : hardener) |
| Salt spray (per TDS) | ASTM B117, 500 hours pass at 80–110 microns DFT |
Surface preparation: Blast the steel to Sa 2.5 (a very thorough clean) to remove rust, mill scale and dirt. The surface must be clean, dry and free of oil, grease and moisture.
Application method and conditions follow the approved technical data sheet.
Coverage, drying time, DFT, pack sizes and finish are provided in the approved TDS / SDS, with revision date.
Blast the steel to Sa 2.5 (a very thorough clean) to remove rust, mill scale and dirt. The surface must be clean, dry and free of oil, grease and moisture.
High Performance Self-Priming Finish Coat (4:1) is a multi-component system. 4:1 (base : hardener). Always follow the approved technical data sheet.
Yes. Request the technical data sheet and safety data sheet and our team will share the current revision.
Suitability depends on the substrate, surface condition and operating environment. Share these details with our team and we will advise.
A two-pack, high-gloss polyurethane topcoat with high chemical resistance.
A quick-drying, solvent-based, single-pack enamel paint.
A quick-drying, single-pack acrylic paint.
Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.