Industrial Paints, Specialty Coatings & Anti-Rust Solutions
Home/Knowledge Centre/Corrosion basics

Why Does Steel Corrode?

Rust needs three things: steel, water and oxygen. Take away any one and it cannot form.

Corrosion basics · 2 min read

Key points

  • Steel, water and oxygen together make rust
  • Salt, pollution and getting wet again and again make it faster
  • Rust is crumbly and does not protect the steel under it
  • A coating works by keeping water and oxygen away from the steel

Rust is a chemical reaction

Steel is mostly iron. When iron meets water and oxygen, it slowly turns into a new material: iron oxide. We call it rust.

You need all three together: steel, water and oxygen. Remove any one of them and rust cannot form.

Why rust keeps spreading

Rust is soft and full of tiny holes. It soaks up water and holds it against the steel, so the damage carries on underneath.

Rust also takes up more space than the steel it came from. That is why it swells, cracks and flakes off, and then fresh steel is exposed.

What makes it faster

  • Salt: from sea air, road salt or factory residues.
  • Dampness: steel that keeps getting wet and dry rusts faster than steel that stays dry.
  • Chemicals and pollution in the air.
  • Warmth, and water droplets that form when surfaces cool down.
  • Rough, dirty or pitted surfaces that hold water.

How a coating helps

A coating does not make steel rust-proof forever. It works like a raincoat: it keeps water, oxygen and salt away from the steel.

But a raincoat only works if it has no holes and it stays attached. That is why cleaning the steel first and applying the coating correctly matter as much as the coating itself.

What to ask about your steel

Ask: how often does it get wet? Is there salt or chemicals around? What condition is the surface in today? The answers help decide how to prepare it and which coating to use.

Ask a question about this topic

Not sure how this applies to your asset? Send a short question and our technical team will reply by email.

This article is general guidance. Always follow the surface preparation, mixing, application and safety information on the product's approved technical data sheet. Standards are listed for reference.

References

  • ISO 9223: Corrosion of metals and alloys, corrosivity of atmospheres
  • ISO 12944-2: Paints and varnishes, corrosion protection of steel structures, classification of environments
Technical consultation

Not sure which coating is right?

Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.

Chat on WhatsApp