Hot Water / Hot Oil Paint (4:1)
A two-pack epoxy paint for hot oil and hot water exposure.
A silicone resin coating for equipment exposed to temperatures up to 600 °C.

In plain words: A paint made for very hot surfaces such as chimneys, exhausts and kilns, up to 600 degrees Celsius.
A silicone-resin coating that protects equipment and machinery that gets very hot. It is meant for surfaces that need heat resistance up to 600 °C.
| Product type | Silicone resin coating |
|---|---|
| Temperature | Intended for heat resistance up to 600 °C |
Surface preparation: The surface must be free of dirt, dust, grease and other particles. Clean with xylene or a similar solvent before painting. Blasting to Sa 2.5 is recommended.
Application method and conditions follow the approved technical data sheet.
Coverage, drying time, DFT, pack sizes and finish are provided in the approved TDS / SDS, with revision date.
The surface must be free of dirt, dust, grease and other particles. Clean with xylene or a similar solvent before painting. Blasting to Sa 2.5 is recommended.
Yes. Request the technical data sheet and safety data sheet and our team will share the current revision.
Suitability depends on the substrate, surface condition and operating environment. Share these details with our team and we will advise.
A two-pack epoxy paint for hot oil and hot water exposure.
A low-VOC, high-solids, glass-flake-reinforced epoxy for severe atmospheric or mechanical exposure.
A self-priming, aluminium-pigmented epoxy mastic for barrier protection over minimal surface preparation.
Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.