Industrial Paints, Specialty Coatings & Anti-Rust Solutions
Home/Products/Specialty Coatings/Acid Resistance Mastic Epoxy Coating (1:1)

Acid Resistance Mastic Epoxy Coating (1:1)

A self-priming, aluminium-pigmented epoxy mastic for barrier protection over minimal surface preparation.

Acid Resistance Mastic Epoxy Coating (1:1)
Specialty Coatings
Aluminium epoxy mastic

In plain words: A thick, aluminium-coloured epoxy that works well on steel with only basic surface preparation and acts as a protective barrier.

A thick epoxy with aluminium flakes that form a barrier against corrosive substances. It is low in stress and high in solids. It is self-priming (no separate first coat) and works well on steel even with basic surface preparation.

At a glance
Product typeEpoxy mastic
Mix ratio1:1
Suitable substrateSteel

Key features

  • Aluminium flakes give barrier protection
  • Self-priming
  • Works well with minimal surface preparation

Where it is used

  • Steel surfaces

See how Acid Resistance Mastic Epoxy Coating works

BASEHARDENER1 : 1TWO PARTS, MIXED 1 TO 1MINIMAL PREPARATION ON STEELALUMINIUM FLAKES FORM A BARRIERACID DROPS BOUNCE OFF

How to apply

Surface preparation: Surfaces must be clean and dry, free of dirt, dust, oil and other contaminants. Blast cleaning is recommended for the best protection. Over an existing coating, clean it and sand lightly to remove the gloss.

Application method and conditions follow the approved technical data sheet.

Technical data & downloads

Coverage, drying time, DFT, pack sizes and finish are provided in the approved TDS / SDS, with revision date.

Request TDS / SDS

FAQs

What surface preparation is required?

Surfaces must be clean and dry, free of dirt, dust, oil and other contaminants. Blast cleaning is recommended for the best protection. Over an existing coating, clean it and sand lightly to remove the gloss.

What is the mixing ratio?

Acid Resistance Mastic Epoxy Coating (1:1) is a multi-component system. 1:1. Always follow the approved technical data sheet.

Can I get the TDS and SDS?

Yes. Request the technical data sheet and safety data sheet and our team will share the current revision.

How do I know if this suits my asset?

Suitability depends on the substrate, surface condition and operating environment. Share these details with our team and we will advise.

More in Specialty Coatings

Related products

Technical consultation

Not sure which coating is right?

Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.

Chat on WhatsApp