Industrial Paints, Specialty Coatings & Anti-Rust Solutions
Home/Products/Specialty Coatings/High Build Glass Flake Epoxy Coating (4:1)

High Build Glass Flake Epoxy Coating (4:1)

A low-VOC, high-solids, glass-flake-reinforced epoxy for severe atmospheric or mechanical exposure.

High Build Glass Flake Epoxy Coating (4:1)
Specialty Coatings
Two-pack glass flake epoxy

In plain words: A thick, tough two-part epoxy with tiny glass flakes in it. It protects steel from corrosion and wear in harsh conditions.

A thick, two-part epoxy paint with tiny glass flakes in it. It can be used as a first coat or a finish coat on steel. It protects well against corrosion and wear, for steel in severe weather or heavy mechanical conditions. It is low in VOC (solvents) and high in solids.

At a glance
Product typeTwo-pack glass flake epoxy
Mix ratio4:1 (base : hardener)
UsePrimer or finish coat on steel

Key features

  • Low VOC and high solids
  • Glass flakes strengthen the coating
  • Good protection against corrosion and wear

Where it is used

  • Steel in severe weather or heavy mechanical use

See how High Build Glass Flake Epoxy Coating works

STEEL IN SEVERE WEATHER OR HEAVY WEARA THICK TWO-PART EPOXY GOES ONTINY GLASS FLAKES INSIDE THE COATINGIT RESISTS CORROSION AND WEAR

How to apply

Surface preparation: The surface must be clean and free of oil and grease. Blast bare steel to Sa 2.5, with a rough profile of 50 to 100 microns.

Application method and conditions follow the approved technical data sheet.

Technical data & downloads

Coverage, drying time, DFT, pack sizes and finish are provided in the approved TDS / SDS, with revision date.

Request TDS / SDS

FAQs

What surface preparation is required?

The surface must be clean and free of oil and grease. Blast bare steel to Sa 2.5, with a rough profile of 50 to 100 microns.

What is the mixing ratio?

High Build Glass Flake Epoxy Coating (4:1) is a multi-component system. 4:1 (base : hardener). Always follow the approved technical data sheet.

Can I get the TDS and SDS?

Yes. Request the technical data sheet and safety data sheet and our team will share the current revision.

How do I know if this suits my asset?

Suitability depends on the substrate, surface condition and operating environment. Share these details with our team and we will advise.

More in Specialty Coatings

Related products

Technical consultation

Not sure which coating is right?

Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.

Chat on WhatsApp