Industrial Paints, Specialty Coatings & Anti-Rust Solutions
Home/Knowledge Centre/Coating selection

Primer vs Topcoat: What Is the Difference?

The primer, the middle coat and the topcoat each do a different job. Together they form a coating system.

Coating selection · 2 min read

Key points

  • The primer sticks to the surface and gives the first protection
  • A middle coat adds thickness and a stronger barrier
  • The topcoat faces the weather and gives the finish
  • Some products can go straight onto metal

Primer: the foundation

The primer is the first coat. It has to stick to the prepared metal, help stop rust and give the next coats something to hold on to. On its own it usually cannot face sun, weather or chemicals for long.

Middle coat: thickness and barrier

A middle coat adds thickness and a barrier between the primer and the final paint. It is common in harsh conditions. IMPREUS Corrosion Barrier Coat is a thick middle coat for iron and steel, and is highly recommended for areas near the sea.

Topcoat: the outer layer

The topcoat faces sun, rain, rubbing, cleaning and chemicals. It also gives the colour and shine. For example, IMPREUS Grafted Co-Polymer PU Finish Paint is a two-part polyurethane finish that resists chemicals strongly and comes in many RAL and IS colours.

Can one coat do both jobs?

Some paints are made to go straight onto metal (direct-to-metal). IMPREUS High Performance Self-Priming Finish Coat protects steel without a separate primer, on steel blasted to Sa 2.5. Even then, follow the preparation and thickness on the data sheet.

Simple rules

  • Use products that work together, and check the data sheet
  • Respect the waiting time between coats: too early or too late can cause problems
  • Apply each coat at the thickness given
  • Do not skip a layer the system needs

Ask a question about this topic

Not sure how this applies to your asset? Send a short question and our technical team will reply by email.

This article is general guidance. Always follow the surface preparation, mixing, application and safety information on the product's approved technical data sheet. Standards are listed for reference.

References

  • ISO 12944-5: Protective paint systems
Technical consultation

Not sure which coating is right?

Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.

Chat on WhatsApp