Industrial Paints, Specialty Coatings & Anti-Rust Solutions
Home/Reference/Articles/Coating types

Anti-Rust Primer Types Compared

Primers protect in different ways. Some act as a barrier, some contain zinc, and some are made to be easy to apply. Here is how the main types differ.

Coating types · 2 min read · Updated 18 Nov 2026

Key points

  • Barrier primers keep water and oxygen away from the steel
  • Zinc-rich primers add zinc, which protects the steel at breaks in the film
  • The right choice depends on surface, exposure and the system above it
  • Always check compatibility with the intermediate and topcoat

Barrier primers

Epoxy primers, and many general primers, work as a barrier. They stick well and block moisture and oxygen. They need a well-prepared surface to do their job.

Zinc-rich primers

These contain a high level of zinc metal. Zinc is more reactive than steel, so where the film is damaged, the zinc can corrode first and help protect the steel. They are often used as a pre-fabrication primer because they are compatible with welding and cutting.

Red oxide and traditional primers

Red oxide primers are a long-standing choice for general metal priming, often where conditions are mild and the finish coat is the main protection.

Waterborne single-pack primers

These are easy to apply, with no mixing, and are common in workshop (shop) priming of parts.

TypeHow it protectsIMPREUS example
Epoxy primerBarrier, strong adhesionEpoxy Primer (4:1)
Zinc-loaded primerZinc loading, weld-friendlyHigh Build Grafted Co-Polymer Primer
Red oxide primerGeneral metal primingRed Oxide Primer
Waterborne single packShop application, easy useLow VOC Metal Primer
Chlorinated rubberFast-drying outdoor primerChlorinated Rubber Based Primer

How to choose

Look at the substrate, how well it can be prepared, where it will be used and what goes on top. See "How to Choose an Anti-Rust Primer" for the questions to ask.

Ask a question about this topic

Not sure how this applies to your asset? Send a short question and our technical team will reply by email.

This article is general guidance. Always follow the surface preparation, mixing, application and safety information on the product's approved technical data sheet. Standards are listed for reference.

References

  • ISO 12944-5: Protective paint systems
  • ISO 12944-6: Laboratory performance test methods
Technical consultation

Not sure which coating is right?

Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.

Chat on WhatsApp