Key points
- Waterborne paints use water as the main carrier
- Solvent-based paints use organic solvents, which evaporate as the paint dries
- Waterborne products usually have lower VOC and less smell
- Drying of waterborne paint depends on humidity and temperature
The difference in one line
In both types the carrier evaporates and leaves the dry film. In waterborne paint that carrier is mostly water. In solvent-based paint it is organic solvents such as xylene or other thinners.
Waterborne
- Lower VOC and usually less odour.
- Cleanup with water for many products.
- Drying depends on air movement, temperature and humidity, so it can be slow in damp conditions.
- Not for freezing conditions, and some are less suited to heavy chemical exposure.
Solvent-based
- Dry more reliably in a wide range of weather.
- Strong odour and higher VOC, with fire and ventilation precautions.
- Often used where tough chemical or wear resistance is needed.
What about solvent-free?
Solvent-free coatings have no solvent to evaporate. They are applied as thick films and cure by chemical reaction. They are common for tank linings. IMPREUS Solvent Free Epoxy Food Grade Coating is a two-pack, solvent-free epoxy for storage tanks and equipment.
In the IMPREUS range
IMPREUS Low VOC Metal Primer is a waterborne, single-component primer for shop application to steel, galvanized steel and aluminium parts. It can be top coated with a wide variety of solvent-based coatings.
Ask a question about this topic
Not sure how this applies to your asset? Send a short question and our technical team will reply by email.
This article is general guidance. Always follow the surface preparation, mixing, application and safety information on the product's approved technical data sheet. Standards are listed for reference.
References
- ISO 4618: Paints and varnishes, terms and definitions