Industrial Paints, Specialty Coatings & Anti-Rust Solutions
Home/Reference/Articles/Corrosion basics

Atmospheric Corrosivity Categories (C1 to CX) Explained

ISO 12944 sorts outdoor and indoor environments into corrosivity categories. The category helps decide how tough a coating system needs to be.

Corrosion basics · 2 min read · Updated 18 Nov 2026

Key points

  • The categories run from C1 (very low) to C5 (very high), plus CX for extreme
  • They describe how fast steel would corrode in that environment
  • Coastal and heavy-industry areas fall in the higher categories
  • The category is one input into choosing a coating system, not the whole answer

Why categories exist

A steel beam in a dry heated hall and one on a salty harbour front face very different conditions. A shared scale lets engineers, specifiers and suppliers talk about the same environment and compare coating systems fairly.

CategoryCorrosivityTypical outdoor example
C1Very lowHeated buildings with clean atmospheres (indoors)
C2LowRural areas with low pollution
C3MediumUrban and industrial areas with moderate pollution
C4HighIndustrial areas and coastal areas with moderate salinity
C5Very highIndustrial areas with high humidity, and coastal and offshore areas with high salinity
CXExtremeOffshore and very aggressive industrial areas

Immersion and soil

Steel in water or soil is classed separately (the Im categories in ISO 12944-2), because immersion is more demanding than air exposure.

How the category is used

Together with the expected life (low, medium, high or very high durability) the category guides how many coats, what thickness and what type of paint a system should have. ISO 12944-5 lists example systems. The right choice should also consider chemicals, heat, abrasion and maintenance plans.

In practice

Environments within a plant can vary a lot. A coastal site may have C5 conditions on the outside and a more modest category inside. Always assess the actual place where the steel is.

Ask a question about this topic

Not sure how this applies to your asset? Send a short question and our technical team will reply by email.

This article is general guidance. Always follow the surface preparation, mixing, application and safety information on the product's approved technical data sheet. Standards are listed for reference.

References

  • ISO 12944-2: Classification of environments
  • ISO 9223: Corrosivity of atmospheres, classification
Technical consultation

Not sure which coating is right?

Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.

Chat on WhatsApp