Industrial Paints, Specialty Coatings & Anti-Rust Solutions
Home/Reference/Articles/Problems and fixes

Chalking and Fading of Paint

Chalking is a powdery film on the surface of a paint that is exposed to sunlight. It is the first sign that the surface of the binder is breaking down.

Problems and fixes · 2 min read · Updated 18 Nov 2026

Key points

  • Chalking is caused by sunlight (UV) breaking down the binder at the surface
  • Some coating types, such as epoxies, chalk outdoors more readily than others
  • Chalking is mostly a surface problem and does not mean the steel is rusting
  • For outdoor use, a UV-stable topcoat protects the layers below

How to recognise it

Rub a dark painted surface with your finger. If a chalky residue comes off, the paint is chalking. The colour looks faded because pigment particles are loose at the surface.

Why it happens

Sunlight, especially ultraviolet light, slowly breaks down the resin (binder) at the surface. The pigment is no longer held in place and sits on top as a powder. Heat, moisture and pollution speed it up.

Different resins stand up to sunlight differently. Epoxy coatings are tough but tend to chalk outdoors. Polyurethane topcoats are generally chosen where colour and gloss need to be kept.

Is it a problem?

Light chalking is mainly cosmetic. Heavy chalking means the coating is wearing away and its thickness is dropping, so protection falls over time. It should be dealt with before the film gets thin.

How to fix it

  • Wash and scrub off the chalk. Do not paint over loose chalk, because the new coat will not grip it.
  • Lightly abrade the surface if the data sheet says so.
  • Apply a compatible topcoat suited to outdoor sunlight.

Using this in system design

An epoxy primer and a polyurethane topcoat are a common way to combine toughness underneath with colour and gloss retention outside. IMPREUS Grafted Co-Polymer PU Finish Paint is a two-pack polyurethane finish for exterior or interior use, available in a wide RAL and IS colour range.

Ask a question about this topic

Not sure how this applies to your asset? Send a short question and our technical team will reply by email.

This article is general guidance. Always follow the surface preparation, mixing, application and safety information on the product's approved technical data sheet. Standards are listed for reference.

References

  • ISO 4628-6: Assessment of degree of chalking by the tape method
  • ASTM D4214: Evaluating the degree of chalking of exterior paint films
Technical consultation

Not sure which coating is right?

Tell us about your asset, surface condition and operating environment. Our technical team will help you identify a suitable solution.

Chat on WhatsApp